| E-GLASS ROVING MIXED MAT |
 |
|
Roving mixed mat is used primarily for FRP composites produced by hand lay-up and large molding process. Typical products include boats, automobile parts, storage tanks, furniture and other FRP products. |
| TECHNICAL REQUIREMENTS : |
PRODUCT CHARACTERISTICES: |
|
*R2O content : ≤0.80%
*Coupling agent : Silane
*Moisture : ≤0.10%
*Filament diameter : 17μm
*Loss on ignition : 1.55%+_0.20%
*Compatible resin : Polyester&vinylester |
|
* Free of fuzz, dirt,impurity and other stains
* Fast wet-out & impregnation
* Even thickness, easy lay-up & air release
* Good covering and degassing propertyes
* High mechanical strength and high wet
strength retention |
| PRODUCT SPECIFICATION: |
| Product Code |
Mass(g/㎡) |
width |
Roll weight |
Compatible resins |
| E、CGRM300-1270 |
300 |
1270 |
30 |
30 |
| E、CGRM450-1270 |
450 |
1270 |
30 |
30 |
| E、CGRM600-1270 |
600 |
1270 |
30 |
30 |
| E、CGRM800-1270 |
800 |
1270 |
30 |
30 |
| E、CGRM1000-1270 |
1000 |
1270 |
30 |
30 |
| E、CGRM1200-1270 |
1200 |
1270 |
30 |
30 |
|
Special products are according to customers requirements. |
| INDIVIDUAL AND BULK PACKING: |
* Each roll is winded onto a paper tube and then wrapped up with plastic film, which can be packed in a cardboard box or wrapped up with kraft paper. The rolls are to be horizontally placed.
Rolls can be loaded into a container directly or on pallets. |
| STORAGE: |
|
*Unless otherwise specified, fiberglass products should be stored in a dry, cool and rain-proof area. It is recommended that room temperature between 10 and 35℃ and humidity between 30 and 85%. |
